Skip to content
MetriFab

Casting & Resin Calculators: Epoxy & Candle Wax

For epoxy, enter the surface, river or coaster size and the depth: you get the total to mix, Part A and Part B by volume and by weight, and how many pours it takes within the maker's thickest pour.

For a mold, measure the mold box (or the volume of water it holds) and choose the material: you get the total grams and the split between Part A and Part B. Each branded product uses the maker's published ratio and density, with a link to the data sheet; generic entries use typical values and say so.

A two-part rubber mold, opened, standing behind the plaster apple that was cast in it.
Photo: José-Manuel Benito Álvarez, Wikimedia Commons, CC BY-SA 2.5. Credits

Start here

  • Epoxy Resin Calculator

    How much epoxy do I mix, and in how many pours?

    You enter

    • Epoxy product, or your own ratio and density
    • Coat size, river size or coaster size
    • Depth and extra for waste

    You get

    • Total epoxy to mix
    • Part A and Part B, by volume and by weight
    • How many pours or layers, within the maker's limit
  • Silicone Mold & Resin Calculator

    How much of Part A and Part B do I mix?

    You enter

    • Mold shape and inside size, or the weight of water that fills it
    • Casting material
    • Extra for waste

    You get

    • Total weight to mix
    • Part A and Part B weights
    • The maker's figures it used, with sources

All Casting & Resin tools

Mold making

Epoxy

Candles

Before you start

Volume, then weight, then split

Amount to mix = volume to fill × mixed density, plus 5–10% for what stays in the cup. Then divide by the ratio: 100:10 by weight means 100 g of A for every 10 g of B.

Weight and volume ratios are not interchangeable

The two parts usually have different densities, so a ratio given by weight is not the same by volume. Use the basis printed on your kit.

Casting products

Each page opens the calculator with that product's figures filled in.

Guides

Other workshop areas